The previous chapter covered the basics of threads creation using default attributes. This chapter discusses setting attributes at thread creation time.
Note that only pthreads uses attributes and cancellation, so the API covered in this chapter is for POSIX threads only. Otherwise, the functionality for Solaris threads and pthreads is largely the same.
Attributes are a way to specify behavior that is different from the default. When a thread is created with pthread_create() or when a synchronization variable is initialized, an attribute object can be specified. Note: however that the default atributes are usually sufficient for most applications.
Impottant Note: Attributes are specified only at thread creation time; they cannot be altered while the thread is being used.
Thus three functions are usually called in tandem
The following code fragment should make this point clearer:
#include <pthread.h> pthread_attr_t tattr; pthread_t tid; void *start_routine; void arg int ret; /* initialized with default attributes */ ret = pthread_attr_init(&tattr); /* call an appropriate functions to alter a default value */ ret = pthread_attr_*(&tattr,SOME_ATRIBUTE_VALUE_PARAMETER); /* create the thread */ ret = pthread_create(&tid, &tattr, start_routine, arg);
In order to save space, code examples mainly focus on the attribute setting functions and the intializing and creation functions are ommitted. These must of course be present in all actual code fragtments.
An attribute object is opaque, and cannot be directly modified by assignments. A set of functions is provided to initialize, configure, and destroy each object type. Once an attribute is initialized and configured, it has process-wide scope. The suggested method for using attributes is to configure all required state specifications at one time in the early stages of program execution. The appropriate attribute object can then be referred to as needed. Using attribute objects has two primary advantages:
Attribute objects require attention at process exit time. When the object is initialized, memory is allocated for it. This memory must be returned to the system. The pthreads standard provides function calls to destroy attribute objects.
The function pthread_attr_init() is used to initialize object attributes to their default values. The storage is allocated by the thread system during execution.
The function is prototyped by:
int pthread_attr_init(pthread_attr_t *tattr);
An example call to this function is:
#include <pthread.h> pthread_attr_t tattr; int ret; /* initialize an attribute to the default value */ ret = pthread_attr_init(&tattr);
The default values for attributes (tattr) are:
| Attribute | Value | Result |
| scope | PTHREAD_SCOPE_PROCESS | New thread is |
| unbound - | ||
| not | ||
| permanently | ||
| attached to | ||
| LWP. | ||
| detachstate | PTHREAD_CREATE_JOINABLE | Exit status |
| and thread are | ||
| preserved | ||
| after the | ||
| thread | ||
| terminates. | ||
| stackaddr | NULL | New thread |
| has | ||
| system-allocated stack | ||
| address. | ||
| stacksize | 1 megabyte | New thread |
| has | ||
| system-defined | ||
| stack size. | ||
| priority New thread | ||
| inherits | ||
| parent thread | ||
| priority. | ||
| inheritsched | PTHREAD_INHERIT_SCHED | New thread |
| inherits | ||
| parent thread | ||
| scheduling | ||
| priority. | ||
| schedpolicy | SCHED_OTHER | New thread |
| uses | ||
| Solaris-defined | ||
| fixed priority | ||
| scheduling; | ||
| threads run | ||
| until | ||
| preempted by a | ||
| higher-priority | ||
| thread or | ||
| until they | ||
| block or | ||
| yield. |
This function zero after completing successfully. Any other returned value indicates that an error occurred. If the following condition occurs, the function fails and returns an error value (to errno).
The function pthread_attr_destroy() is used to remove the storage allocated during initialization. The attribute object becomes invalid. It is prototyped by:
int pthread_attr_destroy(pthread_attr_t *tattr);
A sample call to this functions is:
#include <pthread.h> pthread_attr_t tattr; int ret; /* destroy an attribute */ ret = pthread_attr_destroy(&tattr);
Attribites are declared as for pthread_attr_init() above.
pthread_attr_destroy() returns zero after completing successfully. Any other returned value indicates that an error occurred.
When a thread is created detached (PTHREAD_CREATE_DETACHED), its thread ID and other resources can be reused as soon as the thread terminates.
If you do not want the calling thread to wait for the thread to terminate then call the function pthread_attr_setdetachstate().
When a thread is created nondetached (PTHREAD_CREATE_JOINABLE), it is assumed that you will be waiting for it. That is, it is assumed that you will be executing a pthread_join() on the thread. Whether a thread is created detached or nondetached, the process does not exit until all threads have exited.
pthread_attr_setdetachstate() is prototyped by:
int pthread_attr_setdetachstate(pthread_attr_t *tattr,int detachstate);
pthread_attr_setdetachstate() returns zero after completing successfully. Any other returned value indicates that an error occurred. If the following condition occurs, the function fails and returns the corresponding value.
An example call to detatch a thread with this function is:
#include <pthread.h> pthread_attr_t tattr; int ret; /* set the thread detach state */ ret = pthread_attr_setdetachstate(&tattr,PTHREAD_CREATE_DETACHED);
Note - When there is no explicit synchronization to prevent it, a newly created, detached thread can die and have its thread ID reassigned to another new thread before its creator returns from pthread_create(). For nondetached (PTHREAD_CREATE_JOINABLE) threads, it is very important that some thread join with it after it terminates -- otherwise the resources of that thread are not released for use by new threads. This commonly results in a memory leak. So when you do not want a thread to be joined, create it as a detached thread.
It is quite common that you will wish to create a thread which is detatched from creation. The following code illustrates how this may be achieved with the standard calls to initialise and set and then create a thread:
#include <pthread.h> pthread_attr_t tattr; pthread_t tid; void *start_routine; void arg int ret; /* initialized with default attributes */ ret = pthread_attr_init(&tattr); ret = pthread_attr_setdetachstate(&tattr,PTHREAD_CREATE_DETACHED); ret = pthread_create(&tid, &tattr, start_routine, arg);
The function pthread_attr_getdetachstate() may be used to retrieve the thread create state, which can be either detached or joined. It is prototyped by:
int pthread_attr_getdetachstate(const pthread_attr_t *tattr, int *detachstate);
pthread_attr_getdetachstate() returns zero after completing successfully. Any other returned value indicates that an error occurred.
An example call to this fuction is:
#include <pthread.h> pthread_attr_t tattr; int detachstate; int ret; /* get detachstate of thread */ ret = pthread_attr_getdetachstate (&tattr, &detachstate);
A thread may be bound (PTHREAD_SCOPE_SYSTEM) or an unbound (PTHREAD_SCOPE_PROCESS). Both these types of types are accessible only within a given process.
The function pthread_attr_setscope() to create a bound or unbound thread. It is prototyped by:
int pthread_attr_setscope(pthread_attr_t *tattr,int scope);
Scope takes on the value of either PTHREAD_SCOP_SYSTEM or PTHREAD_SCOPE_PROCESS.
pthread_attr_setscope() returns zero after completing successfully. Any other returned value indicates that an error occurred and an appropriate value is returned.
So to set a bound thread at thread creation on would do the following function calls:
#include <pthread.h> pthread_attr_t attr; pthread_t tid; void start_routine; void arg; int ret; /* initialized with default attributes */ ret = pthread_attr_init (&tattr); /* BOUND behavior */ ret = pthread_attr_setscope(&tattr, PTHREAD_SCOPE_SYSTEM); ret = pthread_create (&tid, &tattr, start_routine, arg);If the following conditions occur, the function fails and returns the corresponding value.
The function pthread_attr_getscope() is used to retrieve the thread scope, which indicates whether the thread is bound or unbound. It is prototyped by:
int pthread_attr_getscope(pthread_attr_t *tattr, int *scope);
An example use of this function is:
#include <pthread.h> pthread_attr_t tattr; int scope; int ret; /* get scope of thread */ ret = pthread_attr_getscope(&tattr, &scope);
If successful the approriate (PTHREAD_SCOP_SYSTEM or PTHREAD_SCOPE_PROCESS) wil be stored in scope.
pthread_att_getscope() returns zero after completing successfully. Any other returned value indicates that an error occurred.
The POSIX draft standard specifies scheduling policy attributes of SCHED_FIFO (first-in-first-out), SCHED_RR (round-robin), or SCHED_OTHER (an implementation-defined method). SCHED_FIFO and SCHED_RR are optional in POSIX, and only are supported for real time bound threads.
Howver Note, currently, only the Solaris SCHED_OTHER default value is supported in pthreads. Attempting to set policy as SCHED_FIFO or SCHED_RR will result in the error ENOSUP.
The function is used to set the scheduling policy.It is prototyped by:
int pthread_attr_setschedpolicy(pthread_attr_t *tattr, int policy);
pthread_attr_setschedpolicy() returns zero after completing successfully. Any other returned value indicates that an error occurred.
To set the scheduling policy to SCHED_OTHER simply do:
#include <pthread.h> pthread_attr_t tattr; int ret; /* set the scheduling policy to SCHED_OTHER */ ret = pthread_attr_setschedpolicy(&tattr, SCHED_OTHER);
There is a function pthread_attr_getschedpolicy() that retrieves the scheduling policy. But, currently, it is not of great use as it can only return the (Solaris-based) SCHED_OTHER default value
The function pthread_attr_setinheritsched() can be used to the inherited scheduling policy of a thread. It is prototyped by:
int pthread_attr_setinheritsched(pthread_attr_t *tattr, int inherit);
An inherit value of PTHREAD_INHERIT_SCHED (the default) means that the scheduling policies defined in the creating thread are to be used, and any scheduling attributes defined in the pthread_create() call are to be ignored. If PTHREAD_EXPLICIT_SCHED is used, the attributes from the pthread_create() call are to be used.
The function returns zero after completing successfully. Any other returned value indicates that an error occurred.
An example call of this function is:
#include <pthread.h> pthread_attr_t tattr; int ret; /* use the current scheduling policy */ ret = pthread_attr_setinheritsched(&tattr, PTHREAD_EXPLICIT_SCHED);
The function pthread_attr_getinheritsched(pthread_attr_t *tattr, int *inherit) may be used to inquire a current threads scheduling policy.
Scheduling parameters are defined in the sched_param structure; only priority sched_param.sched_priority is supported. This priority is an integer value the higher the value the higher a thread's proiority for scehduling. Newly created threads run with this priority. The pthread_attr_setschedparam() is used to set this stucture appropiately. It is prototyped by:
int pthread_attr_setschedparam(pthread_attr_t *tattr, const struct sched_param *param);
and returns zero after completing successfully. Any other returned value indicates that an error occurred.
An example call to pthread_attr_setschedparam() is:
#include <pthread.h> pthread_attr_t tattr; int newprio; sched_param param; /* set the priority; others are unchanged */ newprio = 30; param.sched_priority = newprio; /* set the new scheduling param */ ret = pthread_attr_setschedparam (&tattr, ¶m);
The function pthread_attr_getschedparam(pthread_attr_t *tattr, const struct sched_param *param) may be used to inquire a current thread's priority of scheduling.
Typically, thread stacks begin on page boundaries and any specified size is rounded up to the next page boundary. A page with no access permission is appended to the top of the stack so that most stack overflows result in sending a SIGSEGV signal to the offending thread. Thread stacks allocated by the caller are used as is.
When a stack is specified, the thread should also be created PTHREAD_CREATE_JOINABLE. That stack cannot be freed until the pthread_join() call for that thread has returned, because the thread's stack cannot be freed until the thread has terminated. The only reliable way to know if such a thread has terminated is through pthread_join().
Generally, you do not need to allocate stack space for threads. The threads library allocates one megabyte of virtual memory for each thread's stack with no swap space reserved. (The library uses the MAP_NORESERVE option of mmap to make the allocations.)
Each thread stack created by the threads library has a red zone. The library creates the red zone by appending a page to the top of a stack to catch stack overflows. This page is invalid and causes a memory fault if it is accessed. Red zones are appended to all automatically allocated stacks whether the size is specified by the application or the default size is used.
Note: Because runtime stack requirements vary, you should be absolutely certain that the specified stack will satisfy the runtime requirements needed for library calls and dynamic linking.
There are very few occasions when it is appropriate to specify a stack, its size, or both. It is difficult even for an expert to know if the right size was specified. This is because even a program compliant with ABI standards cannot determine its stack size statically. Its size is dependent on the needs of the particular runtime environment in which it executes.
When you specify the size of a thread stack, be sure to account for the allocations needed by the invoked function and by each function called. The accounting should include calling sequence needs, local variables, and information structures.
Occasionally you want a stack that is a bit different from the default stack. An obvious situation is when the thread needs more than one megabyte of stack space. A less obvious situation is when the default stack is too large. You might be creating thousands of threads and not have enough virtual memory to handle the gigabytes of stack space that this many default stacks require.
The limits on the maximum size of a stack are often obvious, but what about the limits on its minimum size? There must be enough stack space to handle all of the stack frames that are pushed onto the stack, along with their local variables, and so on.
You can get the absolute minimum limit on stack size by calling the macro PTHREAD_STACK_MIN (defined in <pthread.h>), which returns the amount of stack space required for a thread that executes a NULL procedure. Useful threads need more than this, so be very careful when reducing the stack size.
The function pthread_attr_setstacksize() is used to set this a thread's stack size, it is prototyped by:
int pthread_attr_setstacksize(pthread_attr_t *tattr, int stacksize);
The stacksize attribute defines the size of the stack (in bytes) that the system will allocate. The size should not be less than the system-defined minimum stack size.
pthread_attr_setstacksize() returns zero after completing successfully. Any other returned value indicates that an error occurred.
An example call to set the stacksize is:
#include <pthread.h> pthread_attr_t tattr; int stacksize; int ret; /* setting a new size */ stacksize = (PTHREAD_STACK_MIN + 0x4000); ret = pthread_attr_setstacksize(&tattr, stacksize);
In the example above, size contains the size, in number of bytes, for the stack that the new thread uses. If size is zero, a default size is used. In most cases, a zero value works best. PTHREAD_STACK_MIN is the amount of stack space required to start a thread. This does not take into consideration the threads routine requirements that are needed to execute application code.
The function pthread_attr_getstacksize(pthread_attr_t *tattr, size_t *size) may be used to inquire about a current threads stack size as follows:
#include <pthread.h> pthread_attr_t tattr; int stacksize; int ret; /* getting the stack size */ ret = pthread_attr_getstacksize(&tattr, &stacksize);
The function only returns the minimum stack size (in bytes) allocated for the created threads stack to the variable stacksize. It DOES NOT RETURN the actual stack size so use the function with care.
You may wish to specify the base adress of thread's stack. The function pthread_attr_setstackaddr() does this task. It is prototyped by:
int pthread_attr_setstackaddr(pthread_attr_t *tattr,void *stackaddr);
The stackaddr parameter defines the base of the thread's stack. If this is set to non-null (NULL is the default) the system initializes the stack at that address.
The function returns zero after completing successfully. Any other returned value indicates that an error occurred.
This example shows how to create a thread with both a custom stack address and a custom stack size.
#include <pthread.h> pthread_attr_t tattr; pthread_t tid; int ret; void *stackbase; int size = PTHREAD_STACK_MIN + 0x4000; stackbase = (void *) malloc(size); /* initialized with default attributes */ ret = pthread_attr_init(&tattr); /* setting the size of the stack also */ ret = pthread_attr_setstacksize(&tattr, size); /* setting the base address in the attribute */ ret = pthread_attr_setstackaddr(&tattr, stackbase); /* address and size specified */ ret = pthread_create(&tid, &tattr, func, arg);
The function pthread_attr_getstackaddr(pthread_attr_t *tattr,void * *stackaddr) can be used to obtain the base address for a current thread's stack address.